成功貿易公司•Success Trading Co.•地址：香港九龍土瓜灣道 82-84 號興華中心八樓 3A 室•電話：+852-2365-1936•傳真：+852-2365-2512
泵系列    詢價服務    與我們聯絡    回首頁
Bioprene Marprene Silicone Neoprene Butyl Tygon Viton	泵膠管 本公司所代理的英國 Watson-Marlow 蠕動泵方便快捷，有數種不同材料、直徑的膠管可配合各類酸、鹼、腐蝕性液體選擇使用。 選擇膠管的不二法門： 先決定哪種管線材料具有合適的化學性質 再選擇最符合工作需要的膠管尺寸 一般而言，在化學性質與膠管尺寸搭配合宜的情況下，材質為 Bioprene 或 Marprene 的管線是最持久耐用的。除此之外，Silicone 膠管最常使用於孔徑在 9.6mm (3/8") 以下的場合，而 Neoprene 膠管則常被拿來滿足孔徑在 12.7mm (1/2") 以上的需要。 Bioprene Check to Quote Wall Thickness = Please Select = 1.6mm 2.4mm 3.2mm 4.0mm 4.8mm Tube Bore = Please Select = Longest life tube to meet USP and NFS Class VI requirements and USDA standards for food handling Comply with FDA 21 CFR 177.260 Working temperature range: 5°C to 80°C Beige Autoclavable Available in 15 metre packs only Standards tubing material for 800 series elements and continuous tubing in 2.3 and 2.5 metre lengths    回頁首 Marprene Check to Quote Wall Thickness = Please Select = 1.6mm 2.4mm 3.2mm 4.0mm 4.8mm Tube Bore = Please Select = Longest life tubing with excellent chemical compatibility Meet USDA standards for food handling Comply with FDA 21 CFR 177.260 Working temperature range: 5°C to 80°C Beige Autoclavable    回頁首 Silicone Check to Quote Material = Please Select = Platinum c. Silicone Wall Thickness = Please Select = 1.6mm 2.4mm 3.2mm 4.0mm 4.8mm Tube Bore = Please Select = Available in one version - Platimum cured It is food and medical quality and meet USP and NFC Class VI standards Platinum cured offers high levels of purity Working temperature range: 20°C to 80°C High permeability Translucent Autoclavable    回頁首 Neoprene Check to Quote Wall Thickness = Please Select = 1.6mm 3.2mm 4.8mm Tube Bore = Please Select = Best tubing material for abrasive slurries and pumping against sustained pressure Good suction and pressure capabilities Working temperature range: 0°C to 80°C Food quality Black Available for high-flow, high-pressure 900 series pumps    回頁首 Butyl Check to Quote Wall Thickness = Please Select = 1.6mm 3.2mm 4.8mm Tube Bore = Please Select = Useful for some chemical compatibility where Marprene and Neoprene are unsuitable Limited pressure and suction performance Working temperature range: 0°C to 80°C Black Low shore hardness suitable for use with 100 series pumps    回頁首 Tygon Check to Quote Wall Thickness = Please Select = 1.6mm 3.2mm Tube Bore = Please Select = Polyvinylchloride thermoplastic R-3603 laboratory formulation for 1.6mm wall thickness tubing and B-44-4X formulation for 3.2mm wall thickness Meet FDA criteria for use with food NFS listed Working temperature range: 20°C to 60°C Glass clear High shore hardness giving excellent pressure and suction performance and low permeability    回頁首 Viton Check to Quote Wall Thickness = Please Select = 1.6mm 3.2mm 4.8mm Tube Bore = Please Select = Expensive but sometimes the only chemically suitable material, especially for handling aggressive acids, solvents and alkalis Low Pressure and suction capabilities Working temperature range: 0°C to 80°C Black    回頁首
泵系列    詢價服務    與我們聯絡    回首頁